| 1. | The magnetic signals are sensed by induction coils .
磁信号由感应线圈所检测。 |
| 2. | Analysis of the force acting on the armature in induction coil gun
感应线圈炮的电枢受力分析 |
| 3. | Speed measuring and locating system of maglev vehicle based on cross induction coils
基于交叉感应回线的磁悬浮列车测速定位系统 |
| 4. | Manufacturer of tesla and induction coils , furnaces and casting equipment for the dental and jewelry industry
-中日合资企业，核心产品是直流永磁微电机。 |
| 5. | Equipped with special holder in order to tune the induction coil finely to the most rational position
配备有专用夹持器，能使感应圈位置微调以达最合理位置。 |
| 6. | By likening a capacitor to a storage tank and an induction coil to a coil spring , tesla realized that a properly configured circuit could amplify electrical signals and raise them to ever higher frequencies and voltages
将电容比拟为储存槽，感应线圈比拟为弹簧，使特士拉理解到，适当的组装电路可以将电流讯号放大，并且增加它的频率及电压。 |
| 7. | Whereas tesla had combined magnetic induction coils , resistors and capacitors to fashion his split - phase motors , he now connected induction coils and capacitors in new configurations to produce high - frequency currents
当时特士拉已经在他的分相马达里结合了磁感应线圈、电阻及电容，现在他将感应线圈与电容以新的方式连结起来，产生高频电流。 |
| 8. | In this thesis , founding on the study of the feature of the communication system in maglev train , the design principia of the communication system in maglev train is brought forward . after understanding the feature of the communication system and the induction signal in maglev train , the advantage and disadvantage of several binary modulating and demodulating methods is studied . then , two communication system based on parallel cable and crossed induction coils is put forward
本文分析了磁浮列车通信系统的特点,提出了设计磁浮列车通信系统需要遵循的原则,针对磁浮列车通信系统和感应信号的特点,对比了多种二进制调制解调方式的特点和优点,提出了基于平行电缆和交叉回线的两种无线感应通信系统。 |
| 9. | Induction heated oil tempered spring wire is a kind of new technical material which has been developed since 1980s . it can be heated by means of eddy induced into itself through electromagnetic coil and this method is mainly used in surface quenching . with correct designing and reasonable current frequency , induction coil and heat treatment process selected , as well as plc controlling applied , the wire can be uniform heated along cross - sectional and longitudinal direction and can be quenched and tempered continuously
应加热油淬火-回火弹簧钢丝，是二十世纪八十年代发展起来的新技术材料，在国外称为itw induction heat oil tempered spring wire 。是通过线圈电磁感应钢丝本身产生的涡流进行加热，通常主要用于表面淬火。经正确设计，选择电流频率，合理的感应线圈及热处理工艺，并实施plc控制，可使钢丝整个截面及长度上得到均匀加热，进行连续整体淬火和回火。 |
